破片模拟弹侵彻钢板的有限元分析

根据破片模拟弹侵彻钢板的实验研究,采用MSC.Dytran对破片模拟弹侵彻钢板的侵彻过程、侵彻特性、钢板的破坏模式以及弹体的侵彻速度、靶板的侵彻阻力进行了有限元分析,并将分析结果与实验结果进行了比较.分析结果表明,破片模拟弹冲击钢装甲的侵彻过程可大致分为初始接触、弹体侵入、剪切冲塞和穿甲破坏4个阶段.有限元分析的破片模拟弹侵彻特性及靶板破坏模式与实验观测结果有较好的一致性,在靶板破口的正面,与弹体平面凸缘两端接触的部分,变形以剪切为主,而与切削面接触的部分,以挤压变形为主;靶板破口背面为剪切冲塞破坏;有限元模拟的弹体剩余速度与实验结果吻合较好,弹体侵彻过程中弹靶作用界面的速度和侵彻速度近似呈线性变化.有限元分析结果还表明,采用适当的模型,有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式.     

基于有限元模型的机枪结构动态特性仿真

在对机枪进行结构设计时,了解机枪的固有频率和射击载荷作用下的动态响应特性对整个武器射击精度的影响十分必要。利用有限元分析软件对某机枪模型进行模态仿真分析,进而得出该武器对射击精度影响较大的部件。同时对机枪在射击载荷作用下的动力响应特性进行仿真计算,阐述了在机枪结构设计时频率匹配、射向一致的必要性,为机枪结构动力修改提供了理论依据。     

基于有限元法的脉冲负载下高弹联轴器轴向力计算方法

以应用于脉冲柴油机发电机组中的高弹联轴器为研究对象,利用CATIA建立高弹联轴器的三维模型导入到Hyper Mesh中进行有限元网格划分,再将其有限元模型导入ANSYS中进行仿真分析,模拟其橡胶块在脉冲负载作用下的动态性能,对高弹联轴器在柴油机输出扭矩和脉冲负载同时作用时产生的轴向力进行仿真计算。结果表明:高弹联轴器在该工况下产生的轴向力较大,并且橡胶块在受交变应力作用时产生多应力集中点。仿真结果与Rivlin经典理论计算结果有较好的一致性,可为消磁舰船动力装置、消磁电站发电机组等场合下的弹性联轴器的选型设计提供参考。     

静止条件下多种轨道-电枢形状的轨道炮电流分布仿真

针对等轨道截面、等炮口截面、等长度、等材料和等电流8种典型的轨道-电枢结构,在电枢速度为0 m／s的情况下,采用Ansoftl 2有限元分析软件,仿真分析电流分布特征,得到：矩形截面轨道一长方体结构电枢的轨道炮有最不均匀的电流分布特征,电流主要分布在轨道外表面和电枢后部凹表面,并且分别对应于趋肤效应和电流短路径聚集现象,跑道形截面的轨道一回转体结构电枢的轨道炮有最均匀的电流密度分布．     

参数化滤波器逼近问题的全局最优算法

基于Lipschitz下界估值和分枝定界技术,给出了一维参数化小波滤波器逼近问题的全局最优算法。由于充分利用了滤波器逼近问题的特点,本方法将原来的Lipschitz算法的线性收敛速率提高为二次收敛速率。     

反对称铺层碳纤维复合材料圆柱壳的双稳态应力特性

双稳态复合材料可广泛应用于各类可变结构的设计。针对反对称铺层的圆柱壳,利用有限元软件ABAQUS的Standard准静态分析,模拟其双稳态跳变过程和跳回过程,探讨在整个连续过程中圆柱壳上的应力分布情况,以及应力随时间和载荷变化的趋势,从而对该类可变结构的设计起到指导作用。结果表明:该类复合材料圆柱壳跳变过程中最大应力出现在载荷施加点与约束点附近,第二稳态下应力关于板中心呈中心对称分布,最大应力沿板壳对角线出现在四个角内侧附近,而跳回过程中应力由第二稳态下的分布慢慢变为集中在约束点附近。而且整个圆柱壳上的最大应力时刻与最大载荷施加的时刻不重叠,具有滞后性。     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

Real-time prediction of projectile penetration to laminates by training machine learning models withfinite element solver as the trainer

Studies on ballistic penetration to laminates is complicated, but important for design effective protection of structures. Experimental means of study is expensive and can often be dangerous. Numerical simu-lation has been an excellent supplement, but the computation is time-consuming. Main aim of this thesis was to develop and test an effective tool for real-time prediction of projectile penetrations to laminates by training a neural network and a decision tree regression model. A large number of finite element models were developed;the residual velocities of projectiles fromfinite element simulations were used as the target data and processed to produce sufficient number of training samples. Study focused on steel 4340tpolyurea laminates with various configurations. Four different 3D shapes of the projectiles were modeled and used in the training. The trained neural network and decision tree model was tested using independently generated test samples using finite element models. The predicted projectile velocity values using the trained machine learning models are then compared with thefinite element simulation to verify the effectiveness of the models. Additionally, both models were trained using a published experimental data of projectile impacts to predict residual velocity of projectiles for the unseen samples. Performance of both the models was evaluated and compared. Models trained with Finite element simulation data samples were found capable to give more accurate predication, compared to the models trained with experimental data, becausefinite element modeling can generate much larger training set, and thus finite element solvers can serve as an excellent teacher. This study also showed that neural network model performs better with small experimental dataset compared to decision tree regression model.     

塔架摆杆系统静动态特性研究

为研究航天发射塔架摆杆系统的静动态特性,利用Pro／E建立其三维实体模型,再将模型导入Abaqus中建立其有限元模型并对该塔架摆杆系统进行静、动态分析计算．通过静态分析,得到塔架关键部位的应力及位移值,对其安全性进行了校核;通过动态分析得到其固有频率及振型,与试验所得频率进行对比,验证有限元建模的正确性．     

土体泊松比对压入管桩单桩挤土位移场的影响

基于ABAQUS有限元软件,采用主从接触算法模拟桩-土相互作用、修正剑桥模型作为土体本构模型,通过在桩顶施加竖向位移荷载以及合适的网格划分技术建立了较为符合压入管桩压桩实际的有限元模型。利用得到的有限元模型模拟了压入管桩压桩产生的挤土位移场,对不同泊松比时压入管桩单桩挤土位移场进行了对比分析。结果表明:不同泊松比时竖向和水平挤土位移场沿深度方向和径向的分布规律趋于一致;土体泊松比的变化会对压入管桩压桩产生的竖向和水平挤土位移场产生较大影响;泊松比越大,压桩产生的竖向和水平挤土位移越大。